BOM series Product data ~8 min read
Data quality

BOM accuracy: how to measure it, the most common BOM errors and the checks that catch them

Published November 22, 2026 — how to measure BOM accuracy, per BOM and per line, why the two rates differ so much, the seven most common errors, the automatic checks that catch them, and a free calculator.

2 rates Per BOM and per line: always say which
pn A BOM of n lines is only right if all of them are
7 Error types to classify

In short: BOM accuracy is measured by checking a sample against reality (assembly, picked kit, torn-down part). Two rates: per BOM (BOMs with no error / BOMs checked) and per line (correct lines / lines checked). The first is always lower: a single wrong line makes the BOM wrong, and with independent errors, 99 % correct lines give only 60.5 % correct BOMs at 50 lines. The errors to classify: wrong item, quantity, missing item, extra item, unit, outdated revision, wrong parent.

1. Measuring BOM accuracy: two rates not to be confused

A BOM is accurate when it describes exactly what gets built: the right items, in the right quantity, in the right unit, at the current revision, under the right parent. It is checked on a sample, against reality: the assembled product, the kit picked by the warehouse, a torn-down part. Two ways of counting the result coexist, and an accuracy figure means nothing until you know which of the two it is.

RateFormulaExample: 40 BOMs, 1,200 lines
Per BOMBOMs with no error / BOMs checked31 / 40 = 77.5 %
Per linecorrect lines / lines checked1,186 / 1,200 = 98.8 %
Expected if errors were independent(per-line accuracy)lines per BOM0.988330 = 70.3 %

The per-line rate flatters: 98.8 % looks excellent, yet almost one BOM in four in the example has at least one error, and it is the whole BOM that blocks an assembly or skews a requirements calculation. The per-BOM rate is the right management indicator; the per-line rate helps locate errors. In the example, the measured per-BOM rate (77.5 %) is better than expected (70.3 %): errors cluster on a few BOMs, often the most recently changed ones, and that is where to look.

60.5 % at 50 lines99 % per line99.9 % per line99.5 % per line100 %50 %0050100150200lines per BOMerror-free BOMs
With independent errors, the share of correct BOMs is pn: it drops fast with the number of lines. A large BOM needs a much higher per-line accuracy than a small one for the same result.

To make the measurement comparable from one month to the next: a sample drawn at random from the BOMs used over the period, the same checking method, and a written rule for what counts as an error (is a misspelt description one? a rounded consumable quantity?).

2. BOM accuracy calculator

Enter the result of your check. The average number of lines per BOM is optional: without it, the calculator uses lines checked / BOMs checked.

Per-BOM accuracy
—
Per-line accuracy
—
Expected if errors independent
—
Per-line accuracy needed for 95 % correct BOMs
—

The last line inverts the formula: for 95 % of BOMs to be correct with n lines, each line must be correct with probability 0.951/n. The calculation runs in your browser. In a spreadsheet: =1-B2/A2 for the per-BOM rate, =1-D2/C2 per line and =(1-D2/C2)^(C2/A2) for the expected value.

3. The 7 most common BOM errors

Classifying each error found by type is what makes the measurement useful: each type has its causes and remedies. Example on the cart BOM, compared with what was actually built:

BOM (system)At assembly1002 M8 screw × 261003 Ø 100 wheel × 41004 Plate × 2— (no line)1009 Spacer × 11005 Ø 25 tube × 1 m1008 Handwheel rev. B✓ correctwrong item (Ø 125)wrong quantity (4)missing item (rivets × 2)extra item (removed)wrong unit (1 piece)outdated revision (rev. C)
A single BOM can combine several error types. Wrong items, quantities and missing items show up at assembly; unit and revision errors often go unnoticed until stocktaking.
ErrorWhere it showsFrequent cause
1. Wrong itemKit, assemblyRe-keying, similar parts poorly numbered
2. Wrong quantityAssembly, shortages, overstockQuantity per parent confused with total quantity
3. Missing itemAssembly stoppedPart not modelled (fasteners, rivets, labels)
4. Extra itemDead stock, wrong costChange not carried over
5. Wrong unitStocktaking, purchasingPieces and metres, kg and g mixed between CAD and ERP
6. Outdated revisionQuality, recallChange without a change order or effective date
7. Wrong parentAssembly station, routingStructure edited by hand, sub-assembly moved

4. The checks that catch errors before the shop floor

Most of these errors can be detected without going to the shop floor, by simple rules applied before each BOM release, in the PDM, PLM, ERP or a spreadsheet:

  • Zero or negative quantities, and non-integer quantities on items managed by the piece.
  • Duplicate items under the same parent: to add up or justify.
  • Line unit different from the item master unit.
  • Obsolete, blocked or not-yet-released items in a released BOM.
  • Revision different from the item's current revision.
  • Phantom items with stock, or stocked sub-assemblies declared phantom (see the phantom item).
  • Differences between the engineering and manufacturing BOMs after eBOM / mBOM reconciliation, and between two revisions with a BOM comparison.

These rules do not catch a well-formed wrong item or a plausible but wrong quantity: for those, feedback from the floor is needed, picked kit or assembly, hence the sample from section 1.

5. Improving: fix the cause, not just the line

  1. Measure every month on a sample of the same size, with the same rule.
  2. Classify each error by type (section 3) and by origin: design, manufacturing engineering, data entry, change.
  3. Remove re-keying: extract the BOM from CAD and PDM rather than retyping it into the ERP (see BOM to ERP integration).
  4. Automate the checks from section 4 before each release.
  5. Route every change through a change order with an effective date, and check its where-used.
  6. Bring feedback back: a difference found at assembly or picking must go back to engineering, not be fixed silently in the ERP.

Printable version: the method and checks as a PDF (A4, no sign-up).

6. FAQ

How do you calculate BOM accuracy?

Check a sample of BOMs against reality (assembly, picked kit, torn-down part). Per-BOM accuracy is the number of BOMs with no error divided by the number of BOMs checked; per-line accuracy is the number of correct lines divided by the number of lines checked. Always state which of the two you measure.

Why is per-BOM accuracy lower than per-line accuracy?

Because a single wrong line makes the whole BOM wrong. If errors are independent, a BOM of n lines, each correct with probability p, is correct with probability p to the power n: 99 % correct lines give 60.5 % correct BOMs at 50 lines.

What are the most common BOM errors?

Wrong item, wrong quantity, missing item, extra item, wrong unit, outdated revision after a change, and a component attached to the wrong parent. The first four show up at assembly; the last three often go unnoticed until stocktaking or a recall.

Which automatic checks should be run on a BOM?

Zero or negative quantities, duplicate items under the same parent, units inconsistent with the item master, obsolete or blocked items, revisions different from the current revision, phantom items with stock, and differences between the engineering and manufacturing BOMs after reconciliation.

How can BOM accuracy be improved?

Measure it on a fixed sample, classify errors by type and origin, fix the cause and not just the line: extraction from CAD rather than re-keying, automatic checks before release, a change order for every change, and feedback from assembly and the warehouse to engineering.

Read next